ProKit Models And Internet Pricing *

Retro Kit Quality made affordable with all advantages

Professional Retrofit
Because PROKIT Includes:

A 2-axis Digital Readout (DRO) with 5 and 10 µm. resolution (0.0002" and 0.0005")

Universal Power Supply.

IP 54 (DIN 40050).

One scale for the cross slide (X) and an optional one for the longitudinal axis (Z). Both with ± 10 µm./m. (± 0.00012"/ft.) accuracy and 3 m. (10 ft.) cables.

A DRO holding arm.

Brackets and screws to mount the scales.

Installation and Operating manual.

Productive Because PROKIT:

Offers Absolute and Incremental reading per Axis.
Saves setup time on tool changes as when worn out or broken.

Performs precise turning with linear lead screw compensation.

Operates in radius or diameter as selected via keyboard.

Provides substantial time saving versus Lathes without Digital Readout (DRO).

Profitable Because PROKIT:

Is easy to install and use.

Offers the DISPLAY-OFF mode, which keeps track of axes position while the display is off.

Eliminates math calculations.

Offers an unsurpassed Features/Quality/Cost ratio.

It is FAGOR.
Fagor PRO Kits
For Lathes

Scales:
Mechanical Specifications

Digital Readout:
In a sturdy industrial casting aluminum case.

·         Reader head movement on roller bearings

·         Accuracy: ± 10 µm./m. (±0.00012" /ft.)

·         Maximum speed:
60 m./min. (197 ft./min.)

·         Maximum vibration:
30 m./sec². (3G)

·         Moving force: <1Kp.

·         Sealing protection: IP 53.

·         Ambient temperature:
0...50ºC (32º...122ºF).

·         Storage Temperature:
-20...+70ºC (-4º...148ºF).

·         Weight:
0.58 Kg. + 0.6 Kg./meter
1.2 Kg. + 2.5 Kg./meter.

·         3m. (10 ft.) cables protected with metal tubing and plastic covering.

·         State of the art VSI technology.

·         DISPLAY-OFF mode.

·         Linear lead screw compensation.

·         Fine/Coarse display resolution selection from keyboard:
0.005/0.01 mm. (0.0002"/0.0005").

·         Direct mm./inch. conversion.

·         Direct Radius / Diameter conversion.

·         Axes count Reset (to Zero).

·         Position preset with Recall.

·         Position value HOLD as assistance in tool change and part measuring.

·         Auto-Test.

·         Data battery back-up.