Retro Kit Quality made affordable with all advantages

Professional Retrofit
Because PROKIT Includes:

A 2-axis Digital Readout (DRO)
Universal Power Supply.

IP 54 (DIN 40050). 

A Digital Readout (DRO) holding arm.

Brackets and screws to mount the scales.

Installation and Operating manual.

All this packaged in a single box.

Productive
Because PROKIT:

Offers Absolute and Incremental reading per Axis.
Saves setup time on tool changes as when worn out or broken.

Performs precise machining with table sag compensation.

Calculates the part center without requiring special accessories.

Operates with Absolute as well as with Incremental (Floating Zero) coordinates.

Profitable
Because PROKIT:

Is easy to install and use.

Offers the DISPLAY-OFF mode, which keeps track of axes position while the display is off.

Eliminates math calculations.

   

Scales:
Mechanical Specifications

Digital Readout:
In a sturdy industrial casting aluminum case.

·         Reader head movement on roller bearings

·         Maximum speed:
60 m./min. (197 ft./min.)

·         Maximum vibration:
30 m./sec². (3G)

·         Moving force: <1Kp.

·         Sealing protection: IP 53.

·         Ambient temperature:
0...50ºC (32º...122ºF).

·         Storage Temperature:
-20...+70ºC (-4º...148ºF).

·         Weight: 0.58 Kg. + 0.6 Kg./meter.

·         3m. (10 ft.) cables protected with metal tubing and plastic covering.

·         State of the art VSI technology.

·         DISPLAY-OFF mode.

·         Table cosine (sag error compensation.

·         Fine/Coarse display resolution selection from keyboard:
0.005/0.01 mm. (0.0002"/0.0005").

·         Direct mm./inch. conversion.

·         Part Centering.

·         Axes count Reset (to Zero).

·         Position preset with Recall.

·         Operation in Absolute and Incremental

·         Position value HOLD as assistance in tool change and part measuring.

·         Auto-Test.

·         Data battery back-up.

·         Selectable AC Power voltages:
110/120/220/240 VAC (+10%-15%).