| Specifications |
TNC 410
M |
TNC 426
M
TNC 430 M |
| Axes |
4
and spindle S |
| TNC 426 M |
5 and spindle S or
4 and 2 spindles |
| TNC 430 M |
up to 9 and spindle S
or 8 and 2 spindles |
|
| Program
entry |
HEIDENHAIN
conversational and according to ISO |
| Program
memory |
Approx.10
000 blocks in
max. 64 programs |
Approx.
54 million blocks;
hard disk with 2 GB |
| Position
data coordinates |
Nominal
positions in Cartesian or polar coordinates,
dimensions absolute or incremental, in mm or inches;
actual position capture |
Input
resolution and
display step |
1
µm or 0.001° |
0,1
µm or 0.0001° |
| Block
processing time |
6
ms |
4
ms |
| High
speed cutting |
- |
Motion
control with minimum jerk |
| FK
free contour programming |
HEIDENHAIN
conversational with graphical support |
| Fixed
cycles |
for
drilling and milling;
data input with graphical support |
| Touch
probe system |
For
tool measurement, workpiece alignment, workpiece measurement
and datum setting |
| Graphics |
For
programming and program verification |
| Data
interface |
RS-232-C/V.24 |
- RS-232-C/V.24 and RS-422/V.11
- Ethernet (option)
|
| Remote
control and diagnosis |
- |
TeleService |
| Integral
PLC |
Approx.
8000 logic-commands |
Approx.
16 000
logic-commands |
| Accessories |
Electronic
handwheel,
Triggering 3-D touch probe TS and TT |
| Option:
digitizing |
With
triggering 3-D touch probe |
With
triggering or measuring
3-D touch probe |
