ECN 400, EQN 400 Series

Bottomed hollow shaft with inside diameter 12 mm, Housing outside diameter 58 mm, Natural frequency of the encoder stator coupling: >= 1250 Hz Mechanically permissible speed: ECN: 12000 rpm EQN: 10000 rpm
	ECN 413: L=56.4±1 EQN 425: L=63.2±1

	ECN 413 Singleturn	EQN 425 Multiturn
Incremental signals	1 VPP
Line count	512 or 2048
Data interface	EnDat or SSI (synchronous-serial)
Absolute position values	8192 (13 bits)
Distinguishable revolutions	–	4096
Power supply	5V (EnDat, SSI) or 10 to 30 V (SSI)
Operating temperature	Max. 100 °C (UP = 5 V) Max. 85 °C (UP = 10 to 30 V)