ECI 1118 Rotary Encoders without Integral Bearings for Integration in Motors

   

AMI HOME  |  HEIDENHAIN AWARDS  REPAIRS & SERVICE CALLS  |  ABOUT US  |  CONTACT US AMI LINE CARD

 




 

Specifications for the ECI 1100 Series
 

Measuring procedures Absolute (singleturn)
Bearing without Integral Bearing
Incremental signals 1 VSS
Line counts 16
System accuracy 480
Cutoff frequency -3dB ≥ 6 kHz
Absolute position values EnDat 2.1
Order designation EnDat 01
Positions per rev 262144 (18 bits)
Electrically permissible speed/Deviations 4000 min-1/ 400 LSB 15000 min-1/ 800 LSB
Processing time tcal ≤ 8 s
Power supply 3.6 to 14 V
Current consumption (w/o load) ≤ 160 mA
Electrical connection Via PCB connector
Electrical connection 15-pin
Shaft Blind hollow shaft
Shaft diameter 6 mm
Mech. permissible speed n ≤ 15000 min-1
Moment of inertia of the rotor 0,76 x 10-6kgm
Permissible axial motion of measured shaft 0.2 mm
Vibration 55 to 2000 Hz ≤ 300 m/s (IEC 60 068-2-6)
Shock (6 ms) ≤ 1000 m/s (EN 60068-2-27)
Max. operating temperature 115 C
Min. operating temperature -20 C
Protection IEC 60529 IP 20 (when mounted)
Weight 0.06 kg

           
                                 

Name:     
Company:
    
Address:
    
City:
    
State:
    
Zip:
    
Work #:
    
E-mail:
    

Comments                                                      
     

Product:     
Model #:
    

                               

 
 

|Linear Scales| 

|What AMI Can Do for You|

Call Toll Free: 1-888-354-2525 

1987 - 2009 Automation and Metrology, Inc.  All rights reserved.