Automation and Metrology

 


 
 

                                           

 

 

 

 

 

 

 

Absolute Modular Rotary Encoders with Protection IP 40
 
 
ECN 1300,Series -  ECN 1313  EQN 1300 Series
Taper shaft 1:10
with functional diameter 9.25 mm
for extremely stiff coupling,
Housing outside diameter 58 mm.
Stator coupling suited for location holes
with 65 mm inside diameter.
Natural frequency of the encoder
stator coupling: >= 2000 Hz
Mechanically permissible speed: 12000 rpm
ECN 1313: L=551
EQN 1325: L=631


ECN 1313

Size 65 mm
Bearing With integral bearing
Measuring procedures Absolute (singleturn)
Mounting Mounted stator coupling
Absolute position values EnDat 2.2
Order designation EnDat 01
Positions per rev 8192 (13 bits)
Electrically permissible speed/Deviations 5000 min-1/ 1 LSB
12000 min-1/ 100 LSB
Processing time tcal ≤ 0.25 s
Incremental signals 1 VSS
Line counts 512
System accuracy 60"
Power supply 5 V 5 %
Current consumption (w/o load) ≤ 160 mA
Electrical connection Via PCB connector
Electrical connection 12-pin
Shaft Taper shaft; taper 1:10
Shaft diameter 9,25 mm
Mech. permissible speed n ≤ 15000 min-1
Starting torque (at 20C) ≤ 0,01 Nm
Moment of inertia of the rotor 2,6 x 10�6 kgm
Natural frequency of stator coupling ≥ 1800 Hz
Permissible axial motion of measured shaft 0.5 mm
Vibration 55 to 2000 Hz ≤ 300 m/s (IEC 60068-2-6)
Shock (6 ms) ≤ 1000 m/s (EN 60068-2-27)
Max. operating temperature 115 C
Min. operating temperature -40
Protection IEC 60529 IP 40 when mounted
Weight Approx. 0.25 kg


 
 

-    Policy     AMI Home     Contact Us  -
Links To Cool Sites      Email The Sales Desk      Where We Are Located  -

 


DOWNLOAD OUR LINE CARD HERE

Call Toll Free: 1-888-354-2525 

1987 - 2009 Automation and Metrology, Inc.  All rights reserved.