UNIVERSAL V-BLOCKS
NO. 9131
Universal V-Blocks have a 0.723 inch drilled hole in the center of the "V", which is useful in providing a clearance for drilling and boring operations. For convenient clamping to angle irons or face plates, the base ledge has four 5/16-18 tapped holes. The clamps do not interfere when the blocks are used on sides or ends, and they may be swung aside or removed entirely.
SPECIFICATIONS
No. 9131 V-Blocks are made of high quality alloy steel, scientifically heat treated for maximum stability and hardened for wear resistance. Furnished singly or in pairs within the stated tolerances and numbered for identification. Each block is provided complete with two clamps and four clamping screws. Each pair is furnished in wooden storage case.
TOLERANCES
| Commercial Class |
 |
 |
| Style No. | Overall Dimensions | Maximum Work Holding Capacity | Approx. Weight | Price | |||
| Length | Width | Height | Individual | Pair | |||
| 9131 | 2-3/4" | 2-3/8" | 1-7/8" | 1-1/2" diameter | 3 lbs. | $731 | $966 |
Extra clamps and clamping screws are available upon request.
See Reference notes 1, 2, 7 and 8
Automation and
Metrology 130 Liberty Street Painesville, Ohio 44077
Phone: (440) 354 6436 Fax: (440) 639 9983
E-mail: sales@auto-met.com
www.auto-met.com
